Why WAN-IFRA Closed Its Chennai Lab And Handed Printability Testing To Anna University

Why WAN-IFRA Closed Its Chennai Lab And Handed Printability Testing To Anna University

WAN-IFRA transferred its printability testing equipment to Anna University in Chennai after shutting down its own print quality laboratory at the RIND premises in the city. Strip away the polite ribbon-cutting phrasing of standard industry dispatches, and the move tells a sharper story: a global news publisher association is stepping back from running a standalone physical lab in South Asia while keeping a practical foothold through academic infrastructure and shared testing rights. For Anna University's Department of Printing and Packaging Technology at the College of Engineering, Guindy (CEG), the transfer brings industrial testing instruments—including an IGT AIC 2-5 Printability Tester and an IGT High Speed Printing Unit IV—directly onto campus.

Pressrooms do not forgive sloppy guesswork. A single batch of newsprint with inconsistent surface porosity or an ink formulation that takes a fraction of a second too long to set can smudge across newsboy fingers, bleed through thin stock, or turn a full morning press run into costly waste.

What Actually Changed When The RIND Lab Closed

Press releases love framing equipment handovers as pure generosity. Reality on the shop floor is usually more transactional.

WAN-IFRA closed its print quality laboratory at the RIND premises in Chennai, where staff had previously handled paper and ink testing, research projects, and printing workshops. Maintaining dedicated lab space, calibration routines, and specialized testing operations requires steady overhead that many industry groups prefer to share or shed when priorities shift toward newsroom AI, digital monetization, and broader association programming.

Under the agreement with Anna University, the association transfers both the IGT printability testing equipment and the operational know-how required to run it, while preserving access for WAN-IFRA to use the gear for future testing when needed. That clause matters. Rather than walking away completely from physical print quality verification in southern India, WAN-IFRA converts fixed lab overhead into a collaborative arrangement with an established engineering institution.

  • Institutional home: The equipment goes to the Department of Printing and Packaging Technology at Anna University's College of Engineering, Guindy in Chennai.
  • Existing track record: The department already had ties to WAN-IFRA's evaluation and jury work for the International Colour Quality Club 2026–2028 cycle.
  • Shared utility: WAN-IFRA retains the option to draw on the equipment for future testing alongside joint research and consultancy possibilities.

http://googleusercontent.com/lmdx_content/SsBHAYxKwEVxeRBKlSaavaoHNJAETVvevumfcTtXnVPyfuCffdncizzeTWHowOPtlXBHBxCxiXSSSvnKfmeShlxthORioXFzZnTFwVlTviGVOvLnrzzKcYZNEKzqaWvNBJZMrLmUW161680

How Printability Testing Works Before The Press Rolls

Most readers never think about the physics happening between ink, roller, and paper fiber. Press operators think about it every hour.

In commercial and newspaper printing, printability testing isolates how a specific paper stock and ink behave together under controlled mechanical conditions before committing thousands of sheets or miles of web stock to a live press. Running a full-scale press just to test whether a new ink formulation resists set-off or avoids print-through burns money fast.

The IGT AIC 2-5 Printability Tester applies a controlled ink film onto a substrate using a test disk. By regulating how much ink is laid down and how it transfers, technicians can measure practical metrics such as ink mileage, drying rates, color gamut, set-off (wet ink transferring onto adjacent surfaces), and print-through (ink showing through from the reverse side of thin paper).

Meanwhile, the IGT High Speed Printing Unit IV is designed to simulate the dynamics of a full-scale printing unit at press speed. Higher speeds change everything. Fluid behavior shifts, dwell times shrink, and paper fibers face sharper mechanical stress, which is why slow benchtop checks cannot tell the whole story of paper runnability and ink transfer.

Together, these measurements help printers and publishers evaluate newsprint and ink against standards such as ISO 12647-3 and ISO 2846-2. Those standards give mills, ink makers, and pressrooms a common technical yardstick instead of relying on subjective eyeballing or vendor claims.

Testing Capability What It Evaluates Why Pressrooms Care
Controlled disk ink application Ink mileage, drying rates, color gamut, set-off, print-through Catches ink-paper mismatches before full-scale production runs
High-speed simulation Ink performance and paper runnability at press speeds Mirrors real press dynamics where slow lab tests fall short
ISO compliance checks Alignment with benchmarks like ISO 12647-3 and ISO 2846-2 Supports consistent color and quality verification across suppliers

The Overlooked Catch In Campus Handovers

Handing over precision lab gear is easy. Keeping it calibrated, stocked, and running five years from now is the real test.

Precision instruments used in printability testing depend on strict repeatability. Rollers wear, consumables and test substrates must be sourced properly, and operators need disciplined training so test results from a university bench actually mean something to an industrial printer or paper mill.

There is also a structural tension inside public university engineering departments. Academics are rewarded for teaching, publications, and curriculum milestones, while commercial testing and consultancy demand turnaround discipline, equipment uptime, and steady maintenance budgets. Anna University registrar V. Kumaresan and department head M. Kanchana have pointed to stronger laboratory capabilities, student hands-on experience, collaborative research, consultancy, and work on sustainable printing materials. Turning that promise into routine industry credibility will require consistent upkeep long after the initial transfer paperwork is signed.

Still, the strategic logic makes sense for a mature physical industry. In regions where print newspapers, commercial presses, and packaging lines still operate at scale, technical competence should not vanish simply because a trade body closes a local lab. Putting real printability testing hardware in front of engineering students at CEG gives the next wave of print and packaging specialists a chance to diagnose ink and paper behavior with actual instruments rather than guesswork.

Check whether regional mills, ink suppliers, and local pressrooms actually send samples to Anna University over the next year—because real commercial testing demand, not an announcement, will prove whether this handover sticks.

IE

Isabella Edwards

Isabella Edwards is a meticulous researcher and eloquent writer, recognized for delivering accurate, insightful content that keeps readers coming back.